Product Code: ARDPSII
Manufacturer: ART Applied Research and Technology
Call for price
Available within 2-5 working days
Designed as the ideal preamp for any application, the tube driven TPS II and DPS II add warmth and texture to any audio source. These two-channel high performance preamps use a hand selected 12AX7A tube in the low noise input circuitry. This, coupled with ART's proprietary V3TM (Variable Valve Voicing) and variable input impedance allow the TPS II and DPS II to deliver incredible performance from cost effective single space rackmount solutions.
In the case of the DPS II, the added convenience of direct digital output connectivity making it an ideal expander for any computer interface or sound card with RCA S/Pdif digital input.
V3TM provides optimized reference points to begin the recording process. The V3TM presets were created and fine-tuned by some of the industry's top studio and live-sound engineers. V3TM technology allows you to select between a multitude of presets designed for guitars (electric and acoustic), keyboards, bass guitars, drums, vocals and more.
Variable Input Impedance
Variable input impedance increases the sonic potential of the TPS II & DPS II even further. It delivers entirely new sonic textures and tone by varying the input impedance of the preamp, which in turn varies the way the microphone reacts to the load of the preamp. This creates a wide range of new sonic possibilities with any modern or vintage condenser, ribbon or dynamic microphone.
The variable impedance control is infinitely variable allowing much finer control and the ability to tune the preamp to the microphone's ideal sweet spot. A feature usually only available on far more expensive and exclusive microphone preamps.
Extremely Wide Dynamic Range
The DPS II and TPS II can accept up to +20dB peaks while maintaining over 120dB dynamic range with incredibly low distortion. Input LED metering monitors the signal level of the input amplifier so maximum gain can be achieved without clipping the preamp at the input.
OPLTM (Output Protection Limiter)
ART's OPLTM (Output Protection Limiter), which precisely and accurately controls and maintains the output peak signal. The OPLTM circuitry is crucial in protecting the next link in a signal chain - such as a hard-disk recording system or a sound card - because unlike analog clipping that sounds musical and sometimes pleasing, digital clipping is nasty and often fatal for your monitors' tweeters.
Digital Connectivity (DPS II)
Digital outputs include S/PDIF, TOSLINK or ADAT (front panel selectable). The A/D is front panel adjustable from 44.1 to 96K or syncs to ADAT or external word clock (32KHZ to 100KHz). Multiple DPS II's can be added to an ADAT stream.
A versatile insert loop on each channel provides access for additional signal processing or direct access to our high quality A/D converter. Separate gain controls on analog and digital outputs allow you to optimize the unit for simultaneous applications.
Variable Input Impedance
Improved V3TM Variable Valve Voicing Presets
LED Input Meter with Analog Output Meter
Enhanced ART Tube Technology Adds Warmth
Automatically switches between instrument and microphone preamp
Wide Frequency Response (5hz/50kHz)
Enhanced OPLTM Output Protection Limiter
24bit/96KHz A-to-D Conversion (DPS II Only)
S/PDIF, TOSLINK or ADAT Digital Output (DPS II Only)
CMMR >75dB (typ. @ 1kHz)
Dynamic Range > 100dB
Equivalent Input Noise -129dBu (A weighted, xlr to xlr)
Frequency Response 5Hz to 50kHz (+0 to -1dB)
Input/Output Connections 1/4" RTS unbalanced. Tip = input, Ring = analog output. 10K Input impedance. 0dBu = digital clip point at input level max. Level control offers full mute at min setting. � Sample Rate: Internal Selectable 44.1KHz, 48KHz, 88.2KHz, 96KHz � External: Wordclock, ADAT. � Wordclock Input: BNC connector, 100 Ohms (terminated), 3.25V p-p min, 25KHz (min) to 105KHz (max) sample rate. � Optical Input: ADAT optical Selectable for sample rate locking. Also used as a source of ADAT data to be transmitted on unused ADAT channels. � Optical Output: ADAT optical or S/PDIF selectable. � ADAT Mode: Contains 24 bit ADAT data arranged DPS CH1 = ADAT odd channel(s), CH2 = even channel(s).
Maximum Gain 74dB (inst. input to xlr)
Maximum Gain XLR to XLR 80dB
Maximum Input Level +19dBu (xlr); +22dBu (inst. input)
Maximum Output Level +28dBu (xlr); +22dBu (1/4")
Phantom Power +48 volts
Total Harmonic Distortion .01% (clean), 0.1% (warm)
Vacuum Tube 12AX7A - Dual Triode (Hand Selected)
Dimensions 5.5"d x 19"w x 1.75"h
Weight 4.85 lbs (2.2 kg)
With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.
Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.
© Copyright 2018 A.C. Entertainment Technologies Ltd. All Rights Reserved - E&OE
Dear visitor - firstly, welcome and thank you for visiting the A.C. Audio Online website!
We value your custom and pride ourselves on the customer service we provide to all our customers. As you'll no doubt appreciate, the service we provide comes at a price and consequently we have implemented a minimum order value of £59.99 (including VAT) for all orders placed. Unfortunately, lower value orders are not economically viable due to the administrative costs. Better control of our costs helps to improve our efficiency and allows us to carry on providing the levels of service you've come to expect.
We hope you enjoy your visit and if there is anything you need any assistance with, please don't hesitate to let us know via Live Chat, Email or Phone – we'd love to hear from you.