Product Code: KLDN540
Manufacturer: Klark Teknik
Free mainland UK shipping available for this product
Our Price £1,148.99INC
Available within 5-7 working days
Compressors were originally devised to reduce the dynamic range of audio signals. To do this they use gain modification that makes adjustments to signal levels automatically, dependant on the level and dynamic of the signal itself, and upon the character and control settings of the particular compressor unit.
Throughout the history of dynamics processing many different types of compressor have been produced using many different types of gain technology. Each type has a distinctive sound. Users have found many applications which benefit from these often unintentional compression audio artifacts, taking the use of compressors far beyond simple dynamic range reduction, sometimes even generating the complete reverse; dynamic enhancement. It is with these creative applications in mind, that the DN540 has been designed to offer a latency-free, comprehensive and compact dynamics processing package.
With its unique presence feature the DN540 will be especially useful on vocals to eliminate the "pumping" effects of spill and to add "air" to the sound without introducing noise.
The Compressor shall provide four (4) complete channels of creative presence-accentuating compression in a standard 1U 19" rack mount chassis. Each channel shall have an electronically-balanced input and output on 3-pin XLR connectors.
Each channel shall have a rotary Threshold control to set the signal level at which the Compressor applies compression and a rotary Ratio control to set the amount of compression applied above the set threshold.
Each channel shall have rotary controls for setting the Attack and Release times of the Compressor. Each channel shall have a latching pushbutton switch with an associated green LED labelled "AUTO" to select rms-sensing Auto compression mode instead of the default peak-sensing Manual compression mode. In Auto compression mode the Attack and Release rotary controls shall be disabled.
Each channel shall have a rotary Presence control to dynamically accentuate a broad range of frequencies centred around 5 kHz. The purpose of this function shall be to allow high-mid frequency content often lost when compression is applied to be retained.
Each channel shall have a rotary Gain control to apply make-up gain to the Compressor.
Each channel shall have a latching pushbutton switch with an associated orange LED labelled "HARD" to change the compression characteristic from the default soft knee setting to a hard knee setting.
Each channel shall have a latching pushbutton switch with an associated red LED labelled "BYPASS" to remove the Compressor from the signal path.
Each channel shall have a six (6) segment attenuation meter to show the amount of gain reduction being applied by the Compressor.
Each channel shall have a six (6) segment signal level meter which by default shall show the compressor output signal level. A latching pushbutton switch shall be included on each channel with a green LED labelled "MTR I/P" to select input level metering instead.
Each channel shall have a latching pushbutton switch with an associated yellow LED labelled "EXT" to select the external sidechain ¼" TRS Jack input as the signal source for the Compressor sidechain instead of the signal that the Compressor is acting on.
The Compressor shall have a channel link facility whereby adjacent channels can have their sidechains summed with the left-handmost channel acting as the master control. Channels 1-3 shall have a latching pushbutton switch with an associated yellow LED labelled "LINK" to allow linking to the adjacent right-hand channel. The presence and gain controls shall remain independent when the channel linking facility is enabled.
The Compressor shall meet or exceed the following specifications:
Distortion: 0.05% (1kHz 0dBu)
Dynamic range: 116dB (20Hz-20kHz unweighted)
Frequency response: ±0.5dB (20Hz-20kHz relative to 1kHz)
Noise floor: -94dBu (20Hz-20kHz unweighted)
Attack time: 0.1ms-20ms
Release time: 50ms-2 secs
Maximum output level: +22dBu into 600 ohms
The Compressor shall have an integral switch-mode power supply capable of operating from a 100 - 240 V a.c. ±10%, 50 to 60 Hz AC power source and have an IEC 60320 C14 mains inlet with integral fuse. A blue LED labelled "POWER" shall be included on the front panel to indicate when the unit is powered on.
The Compressor shall be the KLARK TEKNIK Model DN540 and no alternative specification option is available.
Due to a policy of continual improvement, KLARK TEKNIK reserves the right to alter the function or specification at any time without notice.
With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.
Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.
© Copyright 2017 A.C. Entertainment Technologies Ltd. All Rights Reserved - E&OE
Dear visitor - firstly, welcome and thank you for visiting the A.C. Audio Online website!