AC Audio Online Music Shop, PA, Pro Audio & Live Sound Specialists

A.C. Audio: Online PA, Pro Audio and Live Sound Specialists Call us on 0113 386 9080 Send us an email: Home

Apart Champ 2 High End And Very Dynamic 19 Inch Power Amplifier, 2 x 350w, Black

Product Code: APCHAMPTWO
Manufacturer: Apart

Free mainland UK shipping available for this product

Our Price £464.99INC

Available within 2-5 working days

APart's Champ series realizes what many in the audio industry deemed impossible: an amplifier without cooling fans that is capable of delivering high-end musical sound, high dynamics, high reliability.

No fan

Power amplifiers have to operate in demanding circumstances. Places where the air is full of dust, nicotine or grease. Because power generates heat, power amplifiers typically have fans to keep their electronic circuits cool.

Unfortunately, these cooling fans are a major headache in the use of high-power amplifiers. They tend to be noisy, and if -or rather, when- the fan breaks down because of dust collection, the amplifier overheats and ultimately fails.

A fanless amplifier seems the logical thing, but -until now-, the idea never seemed to work for high quality amps. The electronics simply produce more heat than the unit is able to dissipate. Thus, installers stick to fan-cooled models and get out of bed to replace a fried amplifier ....

Unique heat sinks

Especially for the CHAMP-series, APart introduces the unique, custom-designed side mount heat sinks. In combination with a self-supporting low resonance frame, they make it possible to create a discrete high power amplifier without a noisy and dust-collecting fan inside the enclosure.

This means: less maintenance, no annual fan or dust filter exchange procedure, no more amplifier cleanout, and no more unwanted noise from cooling fans. Champ amplifiers rely on convection cooling only, a unique feature in their output power class!

APC power management circuitry gets the best out of an amplifier

APC power management circuitry has been designed especially for Champ series amplifiers. It is one of the most intelligent amplifier protection circuits ever designed, simply because it does the job without interfering with the typical dynamic character of music.
APC allows the user to preset the power potential of the amplifier, while maintaining high power reserves and thus producing high, clean power. It constantly analyses incoming music signals and keeps dynamics alive. An additional ultra fast peak limiter avoids amplifier clipping. With APC, your system is always in control, including your speakers.

All the components in Champ-2 are audiophile grade quality. Thanks to the tube emulation circuitry, the unit produces an exceptionally warm sound, which considerably reduces listeners' fatigue.

The striking design and technical innovations of the Champ series are setting new industry standards....whether it is for AV, studio, gigs, home or catering applications: experience the pure musical power of CHAMP-2!

A.C. Audio Online YouTube Channel Banner


Dynamic program power, both channels driven
Bridge-mono operation 8 ohm 750 W
2 channel mode 8 ohm 200 W / ch
2 channel mode 4 ohm 350 W / ch
2 channel mode 2.7 ohm* 450 W / ch
Dynamic capacity at 2 ohm*, both channels driven 600 W / ch
*a 2.7 ohm load can be seen as 3 pieces of 8 ohm speakers in parallel (or even 6 pcs of 16 ohm
A 2 ohm load is technically possible but not recommended for long term use at high power.
SINE WAVE POWER, BOTH CHANNELS DRIVEN (not recommended, for reference only)
This amplifier is designed for an audiophile music experience, not for lab testing !
Bridge-mono operation 8 ohm 350W
2 channel mode 8 ohm 120W / ch
2 channel mode 4 ohm 180 W / ch
2 channel mode 2.7 ohm 200 W / ch

Input impedance / sensitivity unbalanced (RCA) / 4 ohm 10 Kohm / 1 V 0dBV
Input impedance / sensitivity balanced (XLR) / 4 ohm 20 Kohm / 1 V 0 dBV
Frequency response (0, -0.5 dB) 10 Hz - 50 kHz
THD < 0.05 %
IMD < 0.06 %
Noise >100 dBA
Gain 30 dB (36 dB in bridged mode)
Damping factor >200
Dynamics and level control APC, switchable for 2-3 or 4-8 ohms
Power amp circuit design High current, high voltage class G
Efficiency (dynamic program of 10 dB, 1 V input) 70 %
Protection circuits DC, HF, clip, overcurrent, short-circuit
Temperature protection 95°C/ch + transformer 105°C
Cooling convectional, no fan
Power consumption 15VA idle, 600VA full program, 1KVA peak
Mains power requirements 230VAC, 50Hz
Net dimensions (cm) (W x H x D) 48.3 x 4.4 x 36
Gross dimensions (cm) (W x H x D) 56 x 10 x 55
Net weight 7.5 kg
Gross weight 9.0 kg

  • UK Based Company
  • Part of A.C. Entertainment Technologies - has its trading origins over 45 years ago
  • UK Stock Holding
  • UK Warranty
  • Free Delivery Over ?150
  • Great Prices
  • Over 20 Years' Experience
  • Specialist Advice
  • Fast Delivery
  • Finance Options Available

With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.

Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.

Purchase orders can be sent directly to or apply for your cash or credit account here. Terms and conditions will apply.

Share This Page

Seen it cheaper?