Product Code: APCHAMPFOUR
Free mainland UK shipping available for this product
Our Price £481.99INC
Available within 2-5 working days
As a part of APart's revolutionary series of convection cooled power amplifiers, Champ-4 is an amplifier without cooling fans. Its four discrete AB-class amplifiers deliver high quality musical sound, high dynamics, and high reliability - all in a one-unit 19" enclosure.
Power amplifiers have to operate in demanding circumstances. Places where the air is full of dust, nicotine or grease. Because power generates heat, power amplifiers typically have fans to keep their electronic circuits cool.
Unfortunately, these cooling fans are a major headache in the use of high-power amplifiers. They tend to be noisy, and if -or rather, when- the fan breaks down because of dust collection, the amplifier overheats and ultimately fails.
A fanless amplifier seems the logical thing, but -until now-, the idea never seemed to work for high quality amps with high output power. Thus, installers stick to fan-cooled models and get out of bed to replace a fried amplifier ....
Especially for the CHAMP-series, APart introduces unique, custom-designed side mount heat sinks. In combination with a self-supporting low resonance frame, they make it possible to create a discrete power amplifier without a noisy and dust-collecting fan inside the enclosure.
This means: less maintenance, no annual fan or dust filter exchange procedure, no more amplifier cleanout, and no more unwanted noise from cooling fans. Because of this, Champ-4 can rely on convection cooling only!
Champ-4 has a torsion-free front in solid brushed aluminum. The removable brackets have a special fixation system that allows easy removal but still assures extraordinary-strength fixation. This makes it possible to use the unit rack mounted as well as freestanding.
On the rear side of the unit the user will find solid binding posts and 4 sets banana screw plugs included.
APC power management circuitry gets the best out of an amplifier
APC power management circuitry has been designed especially for Champ series amplifiers. It is one of the most intelligent amplifier protection circuits ever designed, simply because it does the job without interfering with the typical dynamic character of music.
APC allows the user to preset the power potential of the amplifier, while maintaining high power reserves and thus producing high, clean power. It constantly analyses incoming music signals and keeps dynamics alive. An additional ultra fast peak limiter avoids amplifier clipping. With APC, your system is always in control, including your speakers.
Bridging amplifiers and bridging channels
It is possible to bridge two channels of the Champ-4. By doing this you unite the power of two smaller amplifier channels into a more powerful amplifier channel. The resulting power is usually more than double the power of both amplifiers used individually with the same load. Check the user manual for instructions on how to proceed.
Champ-4 is a four-channel amplifier. If you want to use a subwoofer, it is possible to bridge two of the channels for use as a subwoofer channel. The two remaining channels can be used for the top speakers. It is the ideal solution to create a small music system for small dance floors or parties. As it is equipped with a X-over, you end up having a superior, yet easy-to-use sound system.
The striking design and technical innovations of the Champ series are setting new industry standards....whether it is for AV, studio, gigs, home or catering applications: experience the pure musical power of CHAMP-4!
GENERAL TECHNICAL SPECIFICATIONS:
Input impedance / sensitivity unbalanced (RCA) / 4 ohm 10 Kohm / 1 V 0dBV
Frequency response 20 Hz - 40 kHz
THD < 0.1 %
IMD < 0.15 %
Noise >100 dBA
Gain 26 dB (32 dB in bridged mode)
Damping factor >100
Dynamics and level control APC limiter
Protection circuits DC, clip, overcurrent, short-circuit
Active filter channel 1 and 2 '100' position lowpass at 100Hz/12 dB/oct
Active filter channel 1 and 2 'AP' position APart-audio specific filter characteristic
optimized for APart-audio subs
(check manuals of Subwoofers)
Active filter channels 3 and 4 highpass at 100Hz/12 dB/oct
Temperature protection 90°C/ch + transformer 105°C
Cooling convectional, no fan
Power consumption 26 VA idle, 400VA full program
Mains power requirements 230VAC, 50Hz
Net dimensions (cm) (W x H x D) 48.3 x 4.4 x 36
Gross dimensions (cm) (W x H x D) 56 x 10 x 55
Net weight 7.5 kg
Gross weight 9.0 kg
RATED OUTPUT POWER, ALL CHANNELS DRIVEN:
dynamics program power, all channels driven
bridge-mono operation 8 ohm 230 W
8 ohm / ch 75 W
4 ohm / ch 125 W
dynamics capacity at 2* ohm / single ch 180 W
* this value represents the dynamics at impedance dips at certain frequencies of some speakers,
* this amplifier is NOT designed to drive full 2 ohm loads (example 3 or 4 speakers of 8 ohm in
SINE WAVE POWER, ALL CHANNELS DRIVEN (not recommended, for reference only)
This amplifier is designed for an audiophile music experience, not for lab testing !
Bridge-mono operation 8 ohm 130W
4 channel mode 8 ohm 60W / ch
4 channel mode 4 ohm 80W / ch
With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.
Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.
© Copyright 2016 A.C. Entertainment Technologies Ltd. All Rights Reserved - E&OE