Product Code: KLDN100
Manufacturer: Klark Teknik
Free mainland UK shipping available for this product
Our Price £92.99INC
6 in stock and ready to ship from High Wycombe
The new KLARK TEKNIK DN100 Direct Injection Box is the natural successor to the long-established LBB100.
A ground-up redesign provides an extended dynamic range, lower noise floor and all the world-class audio performance you'd expect from KLARK TEKNIK. DN100 is also designed to handle the rigours of life on the road: a thick aluminium shell protects the electronics, and this in turn is protected by a tough silicone rubber casing, which is replaceable and available as a spare part.
We've also fitted a Kensington security slot in one of the end panels to allow the unit to be made secure using a Kensington MicroSaver security cable.
Attention to detail - it's what makes a good unit into a great one.
The Direct injection module shall provide the functions of transformer isolation, impedance matching and attenuation into a low impedance active balanced input. The module shall be able to accept a maximum input level of at least 30dBu provide switchable attenuation from 0 to 30dB and output the signal into a balanced 600 O load.
Input connectors shall include two quarter inch jack sockets and one 3-pin XLR socket, all linked. Input impedance shall be 1M O (jacks sockets), 20K O (XLR only).
The output shall be transformer balanced and isolated, with a source impedance of 150 Os, capable of driving a 10dBu signal into a 2k_ load. The output connector shall be a 3-pin XLR socket.
An earth lift switch shall be provided to disconnect input and output grounds when required.
The unit shall obtain power from a 48V phantom supply.
The unit shall achieve or exceed the following specifications:
Output noise: -100dBu. 20Hz to 20kHz unweighted, with input terminated by 10k O resistor
Distortion (THD+N): < 0.01% @ 1 kHz, +4dBu
Frequency response: +0.5/-1dB 20Hz to 20kHz
Power consumption: <10mA
The Direct Injection Module shall be the KLARK TEKNIK model DN100 and no alternative option is available.
* The DN100 has been designed to allow use at phantom voltages less than +48V. The unit will function down to +20V (when used with 6k8 dropping resistors) but with reduced headroom and dynamic range. All the specifications above are quoted using standard +48V Phantom power.
Trade Descriptions Act:
Due to the company policy of continuing improvement, we reserve the right to alter these specifications without prior notice. E&OE.
With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.
Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.
© Copyright 2016 A.C. Entertainment Technologies Ltd. All Rights Reserved - E&OE