Product Code: YATF5
Free mainland UK shipping available for this product
Our Price £3,583.99INC
Available within 2-5 working days
In developing the TF series Yamaha engineers built from their existing base of acclaimed high-end mixer interfaces, adding intuitive control in an interface optimized for the type of touch panel control that has become a familiar feature in a wide range of applications. Allowing most operations to be carried out via the touch panel alone, the innovative TF series interface will quickly become second nature to a broad spectrum of users. Whether you have experience with Yamaha digital consoles, work with other digital consoles, operate analog consoles, or have never operated a mixer before, TF consoles will lead you to the desired results quickly and effortlessly through a smooth, efficient workflow. The availability of physical controls surrounding the touch panel further enhances control versatility and precision.
Refined for the smoothest possible operation via touch-panel control, the TF user interface offers a smooth workflow that can be an advantage in any mixing situation. The display content has been specifically designed for easy, direct accessibility, with a layout that promotes the most natural, efficient mixing. Touch panel operation is as easy as shaping the sound with your fingertips.
High input capacity and fader count makes this powerful console ideal for larger applications.
|Fader Configuration||32 + 1 (Master)|
|Mixing Capacity||Input Channels||48 (40 mono + 2 stereo + 2 return)|
|Aux Buses||20 (8 mono + 6 stereo)|
|Input channel functions||8 DCA Groups|
|I/O||Inputs||32 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)|
|On-board processors||DSP||8 Effects + 10 GEQ|
|USB||34x34 USB Audio Interface, 2-track recording via USB Storage Device|
|Sampling frequency rate||Internal||48 kHz|
|Signal delay||Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz|
|Fader||100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders|
|Total harmonic distortion||Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600, INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)|
|Frequency response||+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT|
|Dynamic range||110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.|
|Hum & noise level||Equivalent input noise||–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)|
|Residual output noise||–85 dBu, ST master off (Measured with an A-Weight filter)|
|Crosstalk||–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.|
|Power requirements||100–240 V 50/60 Hz|
|Power consumption||120 W|
|Dimensions||W||866 mm (34.1in)|
|H||225 mm (8.9in)|
|D||599 mm (23.6in)|
|Net weight||20.0 kg (44.1lb)|
|Accessories||Quick Guide, Power Cord, CUBASE AI download information|
|Options||Expansion Card, Foot Switch (FC5)|
|Others||Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C|
|Input Terminals||GAIN||Load |
|For Use With |
|Input Level||Connector||balanced /
|Sensitivity*1||Nominal||Max. before clip
or 600Ω Lines
|-82dBu (61.6V)||-62dBu (0.616mV)||-42dBu (6.16mV)||Combo Jack (XLR-3-31 type *2
or TRS phone *3)
|-6dB||-10dBu (245mV)||+10dBu (2.45V)||+30dBu (24.5V)|
|ST IN 1,2||—||10kΩ||600Ω Lines||-30dBV (31.6V)||-10dBV (316mV)||+10dBV (3.16V)||RCA Pin Jack||Unbalanced|
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain. (All faders and level controls are at maximum position.)
*2. 1: GND, 2: HOT, 3: COLD
*3. Tip: HOT, Ring: COLD, Sleeve: GND
*In these specifications, 0dBu = 0.775Vrms.
*+48V DC (phantom power) can be supplied to INPUT XLR type connectors via each individual software controlled switch.
|Output Terminals||Source |
|For Use With |
|GAIN SW||Output Level||Connector||balanced /
|Nominal||Max. before clip|
|OMNI OUT 1-16||75Ω||600Ω Lines
||"+24dBu" position (default)
||+4dBu (1.23 V)||+24dBu (12.3 V)||XLR-3-32 type *1||Balanced|
|PHONES *3||100Ω||40Ω Phones||—||3mW||75mW||Stereo Phone Jack (TRS) *2||Unbalanced|
*1.1: GND,2: HOT, 3: COLD
*2 Tip: LEFT, Ring: RIGHT, Sleeve: GND
*3 The position of the level control is lowered by 16dB from the maximum.
*In these specifications, 0dBu = 0.775Vrms.
*All output DA converters are 24bit, 128times oversampling.
|USB (TO HOST)||USB||24bit||34ch input / 34ch output, PCM||USB (B type)|
|iPad||USB||—||Playback: MP3 or WAV file data / Record: WAV file data
||USB (A type)
|FOOT SW||—||—||TS Phone
With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.
Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.
© Copyright 2017 A.C. Entertainment Technologies Ltd. All Rights Reserved - E&OE
Dear visitor - firstly, welcome and thank you for visiting the A.C. Audio Online website!
We value your custom and pride ourselves on the customer service we provide to all our customers. As you'll no doubt appreciate, the service we provide comes at a price and consequently we have implemented a minimum order value of £59.99 (including VAT) for all orders placed. Unfortunately, lower value orders are not economically viable due to the administrative costs. Better control of our costs helps to improve our efficiency and allows us to carry on providing the levels of service you've come to expect.
We hope you enjoy your visit and if there is anything you need any assistance with, please don't hesitate to let us know via Live Chat, Email or Phone – we'd love to hear from you.