Product Code: RARADIALSW4
Free mainland UK shipping available for this product
Our Price £1,398.99INC
Available within 2-5 working days
The Radial SW4 is a four channel balanced audio switcher designed for wireless systems, mixing consoles and digital guitar processors to provide backup or greater operational flexibility in a live performance or concert setting.
Each of the four channels is equipped with two XLR inputs and a transformer isolated output that is capable of over +20dB signal handling at all frequencies. This makes the SW4 equally viable for wireless mic systems as it is for switching high output mixing consoles. Channels may be linked together for stereo, tri-channel or quad switching and additional SW4s may be linked for larger system requirements and remotely controlled if need be. Channel-1 is augmented with a 'mix' function that passively sums both inputs together for simultaneous use. All channels are routed to a master bus with 1 & 3 assigned left, and 2 & 4 assigned right.
For monitoring, each channel is equipped with a 3-position PFL switch that selects between source-A, source-B or the stereo bus via the built-in headphone amplifier. The bus may be switched to mono when used with wireless guitar systems. This is augmented with two isolated ¼" guitar outputs with a top-mounted 'set and forget' level control and a front-panel mono output to feed a monitor, tuner or guitar amp.
These features combined make the Radial SW4 the ideal choice for backup systems and for switching multiple balanced audio channels simultaneously.
|Audio circuit type:||Passive Transformer Coupled with Relay Switching|
|Number of channels:||4 x AB select|
|Frequency response:||10Hz to 40Khz|
|Total harmonic distortion:||0.002%|
|Phase deviation:||<3° at all frequencies|
|Input impedance:||Load impedance in parallel with 10K|
|Maximum input:||+26dBu channel to channel|
|Maximum input:||+17dBu channel to bus|
|Channel to channel gain:||-0.26dB with 10k Ohm load
-2.3dB with 600 Ohm load
|Channel to bus gain:||+ 8dB with 10k Ohm load|
|Channel output impedance:||160 Ohms|
|Bus output impedance:||500 Ohms|
|Transformer:||Eclipse ET-LD2 line output|
|Input pad:||Variable trim control|
|Switches:||AB select on each channel|
|PFL (pre-fade listen):||A & B per channel, master bus|
|Bus:||Master bus out with headphones|
|XLR configuration:||AES standard pin-1 ground, pin-2 (+), pin-3 (-)|
|Input connectors:||XLR female|
|Output connectors:||XLR male, 1/4" guitar|
|Bus output:||Stereo or mono assignable|
|Ground lifts:||On all channels & guitar amp outputs|
|Power:||External 100V - 240V AC with 48V Phantom|
|Construction:||14 gauge steel chassis & outer shell|
|Finish:||Durable powder coat|
|Size: (L x W x D)||17.5" x 6" x 1.75" (44.5 x15.25 x 1.75cm)|
|Shipping Size: (L x W x D):||22" x 10" x 4.5" (55.9 x 25.4 x 11.4cm)|
|Conditions:||For use in dry locations only between 5°C and 40°C|
|Warranty:||Radial 3-year, transferable|
|Specifications are subject to change without notice.|
With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.
Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.
© Copyright 2016 A.C. Entertainment Technologies Ltd. All Rights Reserved - E&OE