Product Code: NE006427
Call for price
Available within 2-5 working days
The U 47 fet was first manufactured from 1972 to 1986, and since then has been firmly established in the range of microphones used by many well-known studios. In addition to serving as a soloist microphone, it has become legendary especially for the recording of bass-heavy instruments and for the direct miking of loud amps.
The U 47 fet Collectors Edition is a new edition of this classic, issued in the year 2014. For this, Neumann has resumed production of this classic mic, according to the original production documents and schematics. It is supplied with a high-quality wooden case with sophisticated special packaging, and an individual certificate with the serial number of the microphone.
In terms of technical design, the U 47 fet is a condenser microphone with a cardioid directional characteristic and fet 80 circuit technology. Among other things this technology, also used in the U 87, is characterized particularly by a wide dynamic range. The K 47 double large-diaphragm capsule was already employed in the U 47, the legendary tube-based predecessor of the U 47 fet. The K 47 provides a slight boost in the range above 2 kHz.
If required, a switchable low-cut filter raises the lower cutoff frequency electronically from 40 Hz to 140 Hz, thus suppressing undesirable low frequencies (such as impact sound and wind noise), or serving to compensate for the proximity effect. Switchable attenuation can reduce transmission levels by 10 dB, facilitating the processing of very high sound pressure levels of up to 147 dB. In addition, to prevent overloading of the connected preamp, the output signal can be reduced by 6 dB via a switch on the bottom of the microphone.
In order to ensure stable positioning, the microphone is swivel-mounted on an integrated bracket. The bracket stand connector has 5/8"-27 internal thread, with an adapter for 1/2" and 3/8" threads. The microphone cable can be secured at the side of the stand connector, by using the knurled nut to fasten it in the slot (for cable diameters of up to 5 mm). The microphone is available in classic nickel.
Linear frequency response with a slight boost in the range between 2 and 5 kHz for more clarity to the human voice
Useful amount of proximity effect, particularly good for thin voices
bass roll-off at 40 Hz, switchable high-pass filter at 140 Hz
Vocal and Speech
Bass amp, guitar amp, bass drum, kick drum, acoustic guitar, trombone, flute, piano, etc.
Acoustical operating principle Pressure gradient transducer
Directional pattern Cardioid
Frequency range 40 Hz ... 16 kHz
Sensitivity at 1 kHz into 1 kohm 8 mV/Pa
Rated impedance 150 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR1) 25 dB
Equivalent noise level, A-weighted1) 18 dB-A
Maximum SPL for THD 0.5%2) 137 dB
Maximum SPL for THD 0.5% with preattenuation2) 147 dB
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 69 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 76 dB
Maximum output voltage -3.3 dBu
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 0.5 mA
Matching connector XLR3F
Weight 710 g
Diameter 63 mm
Length 160 mm
In the box
U 47 fet microphone
With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.
Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.
© Copyright 2018 A.C. Entertainment Technologies Ltd. All Rights Reserved - E&OE
Dear visitor - firstly, welcome and thank you for visiting the A.C. Audio Online website!
We value your custom and pride ourselves on the customer service we provide to all our customers. As you'll no doubt appreciate, the service we provide comes at a price and consequently we have implemented a minimum order value of £59.99 (including VAT) for all orders placed. Unfortunately, lower value orders are not economically viable due to the administrative costs. Better control of our costs helps to improve our efficiency and allows us to carry on providing the levels of service you've come to expect.
We hope you enjoy your visit and if there is anything you need any assistance with, please don't hesitate to let us know via Live Chat, Email or Phone – we'd love to hear from you.