Product Code: KLDN530
Manufacturer: Klark Teknik
Free mainland UK shipping available for this product
Our Price £1,148.99INC
Available within 5-7 working days
With the unrelenting absorption of signal processing into digital mixing consoles, outboard gear now has to contribute something extra special merely to justify its space in the rack. The new DN530 Creative Quad Gate does just that. It brings some exciting new tools to the audio party. The DN530 features "Transient Accenting", a creative feature providing an easy way to enhance the attack envelope beyond merely opening the gate. This can provide up to 12dB of additional transient energy and its primary application is to provide additional impact on drums and percussion instruments, although it can be used to enhance the impact of many instruments, including acoustic stringed instruments such as guitar and piano.
Transient Accenting is unique in that it allows the operator precise control over the amount of enhancement applied to each channel of processing.
The DN530 brings a creative flare to drum channels with its unique accent feature which largely eliminates the need for excessive EQ or compression.
The Noise Gate shall provide four (4) complete channels of creative transient-accentuating gating in a standard 1U 19" rack mount chassis. Each channel shall have an electronically-balanced input and output on 3-pin XLR connectors.
Each channel shall have a rotary Threshold control to set the signal level at which the Noise Gate opens. The channel metering shall have a green "THR" LED to indicate when the signal exceeds this threshold.
Each channel shall have rotary controls for setting the Attack, Hold and Release times of the Noise Gate. The channel metering shall have a yellow "HLD" LED to indicate when the Hold portion of the dynamic control envelope is active and an orange "REL" LED to indicate when the release portion of the dynamic control envelope is active. The Hold function shall also have Intelligent Threshold Shift (i-TS) to provide threshold hysteresis to avoid repeated opening and closing of the Noise Gate in response to low frequency signals close to the threshold level set by the user.
Each channel shall have an Accent rotary control to accentuate the initial transient that opens the Noise Gate by adding an overshoot characteristic with up to +12 dB of gain as the Noise Gate opens. The channel metering shall have a blue "ACC" LED to indicate when the Accent function is adding gain to the initial transient. The Accent shall also function independently of the noise gate when the range control is set to 0dB.
Each channel shall have a latching pushbutton switch with an associated orange LED labelled "DUCK" to reverses the operation of the gate so that it closes when signals exceed the threshold set by the user and opens when they go fall below the set threshold. When the Duck function is active, the Accent rotary control and "ACC" LED shall be disabled.
Each channel shall have a rotary Range control to adjust the amount of gain reduction applied to signals below the threshold level. Each channel shall also have a red "SHUT" LED to indicate when the Noise Gate is fully closed.
Each channel shall have a latching pushbutton switch with an associated red LED labelled "BYPASS" to remove the Noise Gate from the signal path.
Each channel shall have a Clip LED included in the channel metering to indicate when the input signal is exceeding the clipping point of the Noise Gate.
Each channel shall also have a sidechain control section with a bandpass filter controlled with a rotary control labelled Frequency to set the filter centre frequency. The sidechain control section shall have a latching pushbutton switch with an associated green LED labelled "FILTER" to put the bandpass filter in the sidechain signal path. The sidechain control section shall also have a latching pushbutton switch with an associated yellow LED labelled "EXT" to select the external sidechain ¼" TRS Jack input as the signal source for the sidechain instead of the signal that the Noise Gate is acting on.
The Noise Gate shall have a Solo Bus to allow monitoring of the sidechain control input signals for each channels. The Solo Bus shall have input and output XLR connectors on the rear panel to facilitate the serial connection of units and to connect to a line input on a mixing console for monitoring via its Solo Bus console headphone amp.
The sidechain control section of each channel shall have a latching pushbutton switch with an associated yellow LED labelled Solo to enable the post-filter sidechain signal onto the Noise Gate solo bus.
The Noise Gate shall meet or exceed the following specifications:
Distortion: 0.05% (1kHz 0dBu)
Dynamic range: 116dB (20Hz-20kHz unweighted)
Frequency response: ±0.5dB (20Hz-20kHz, relative to 1kHz)
Noise floor: -100dBu gate closed (20Hz-20kHz unweighted) / -94dBu gate open (20Hz-20kHz unweighted)
Attack time: 30us-10ms
Hold/Release time: 2ms-2 secs
Maximum output level: +22dBu into 600 ohms
The Noise Gate shall have an integral switch-mode power supply capable of operating from a 100 - 240 V a.c. ±10%, 50 to 60 Hz AC power source and have an IEC 60320 C14 mains inlet with integral fuse. A blue LED labelled "POWER" shall be included on the front panel to indicate when the unit is powered on.
The Noise Gate shall be the KLARK TEKNIK Model DN530 and no alternative specification option is available.
Due to a policy of continual improvement, KLARK TEKNIK reserves the right to alter the function or specification at any time without notice.
With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.
Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.
Dear visitor - firstly, welcome and thank you for visiting the A.C. Audio Online website!
We value your custom and pride ourselves on the customer service we provide to all our customers. As you'll no doubt appreciate, the service we provide comes at a price and consequently we have implemented a minimum order value of £59.99 (including VAT) for all orders placed. Unfortunately, lower value orders are not economically viable due to the administrative costs. Better control of our costs helps to improve our efficiency and allows us to carry on providing the levels of service you've come to expect.
We hope you enjoy your visit and if there is anything you need any assistance with, please don't hesitate to let us know via Live Chat, Email or Phone – we'd love to hear from you.