Product Code: ARPROCHANNELII
Manufacturer: ART Applied Research and Technology
Free mainland UK shipping available for this product
Our Price £418.99INC
1 in stock and ready to ship from High Wycombe
The ART Pro Channel IITM uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.
The ART Pro Channel IITM 's semi-parametric EQ offers wide tune-ability and can be patched before OR after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.
Fully Featured discrete class "A" Tube Microphone Preamplifier
1/4" High Z input on the front panel
Selectable plate Voltage
Smooth musical sounding Optical Compressor
Separate Attack and Release controls
Auto/Manual Attack/Release switch
Large VU and LED meters
Multi section clip monitor LED
Selectable Source switches for VU signal monitoring of any section of the unit
Two insert loops
+4/-10 dB switch for optimal signal output levels
Toroidal power transformer for low noise
Mic: 150 to 3.4K Ohms, variable
Instrument: 2.5M Ohms
Preamp Insert: .5K Ohms
Balanced Output: 600 Ohms balanced
Unbalanced Output: 300 Ohms
Insert Outputs: 300 Ohms
Analog In to Analog Out: 12Hz to 100KHz +0, -1dB
THD @ 1 KHz: <0.15% typical
THD @ to to 20 KHz: <0.033% typical
Equivalent Input Noise
Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted
Instrument: -109 dBu, Input shortened, Max gain, "A" weighted
Maximum Input Level
Mic: +18dBu balanced
Instrument: +15 dBu
Mic: 70dB (XLR to balanced output)
Instrument: 64 dB (1/4" to balanced output
Maximum Output Level
Balanced: +24 dBu
Unbalanced: +20 dBu
Output Level At Meter 0 VU: +4 dBu/-10dBV
Microphone Gain: 0 dB to +56 dB
Instrument Gain: +3 dB to +50 dB
Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave
Boost/Cut: +/- 12 dB on each band
Low Freq. Tuning: 40 / 120 Hz Selectable
MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable
MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable
High Freq. Tuning: 6 KHz / 18 KHz Selectable
Compressor / Limiter
Attack Time: 250 uSec. to 100 mSec.
Release Time: 00 mSec to 3 Sec.
Compression Ratio: 2:1 to 30:1
Dimensions (H x W x D - in): 3.5 x 19.0 x 9.2
Dimensions (cm): 8.9 x 48.3 x 23.3
Weight (lbs/kg): 11/5
Power Requirements: USA - 105 to 125 VAC/ 60 Hz
Export units configured for country of destination.
Note: 0 dBu = 0.775 VRMS, 0 dBV = 1 VRMS
With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.
Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.
© Copyright 2017 A.C. Entertainment Technologies Ltd. All Rights Reserved - E&OE
Dear visitor - firstly, welcome and thank you for visiting the A.C. Audio Online website!