Product Code: PRTEMBLORT10
Free mainland UK shipping available for this product
Our Price £308.99INC
Available within 2-5 working days
To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The Temblor® T8 and T10 let you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
The T8 and T10 provide more user controls than any other subwoofer in their class, enabling seamless integration into your listening environment.
T10 Ins and Outs
The Temblor T10 provides a choice of three input pairs: two sets of balanced inputs (XLR and ¼" TRS) and one pair of RCA unbalanced inputs. Pairs of inputs are provided in order to accept a stereo signal from your audio source.
When both of the balanced connections are in use, the TRS inputs will take precedence over the XLR inputs. The RCA inputs will sum into either balanced connection.
You get two pairs of balanced outputs: XLR and ¼" TRS. The full-range signal connected to the stereo inputs on the T10 is passed through to these outputs so you can connect them to your main left and right studio monitors. If the High Pass Filter switch is engaged, frequencies below 80 Hz are not sent from these outputs.
The T10 also has a balanced XLR output that sends the low-frequency signal from the lowpass filter to a second Temblor T10 for the ultimate in smooth low end.
T10: 10-inch, front-firing, glass-composite low-frequency transducer
T10: Front-firing, bass-reflex acoustic port
Controls and filters:
Input gain control (-30 dB to +6 dB, continuously variable)
Continuously variable lowpass filter (50 Hz to 130 Hz)
Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
T10: Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
T10: Ground-lift switch
Power and safety:
T10: 250 watt, Class AB amplification
Internal damping and heat sink
Integrated rubber feet for stable placement
Inputs and outputs:
T10: Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
T10: Left and right balanced XLR and ¼" TRS outputs
T10: XLR subwoofer output for connecting a second T10
2- Balanced XLR
2- Balanced ¼" TRS
2- Unbalanced RCA
2- Balanced XLR (full range with 80 Hz HPF option)
2- Balanced ¼" TRS (full range with 80 Hz HPF option)
1- Balanced XLR (Sub Out)
Frequency Response 20 Hz - 200 Hz
Low Pass Filter Frequency 50 - 130 Hz (variable)
Signal-to-Noise Ratio >98 dB (A weighted)
THD 0.019% @ power <160W
Amplifier Power 250W peak, 170W RMS
Power Consumption 230W
Amplifier Type Class AB
Peak SPL at 1m 113 dB
Woofer 10" glass-composite, front-firing
Acoustic Port Front-firing bass reflex
Input Gain Range -30 to +6 dB
Polarity Switch 0° or 180°
Low Pass Filter Control 50 Hz to 130 Hz
Ground Lift Switch On/Off
High Pass Filter Switch On/Off
Bypass Footswitch On/Off
External mains fuse
100-120V ~50/60 Hz or 220-240V ~50/60 Hz
w 12.6" (320 mm) x d 15.75" (400 mm) x h 15.75" (400 mm)
39.46 lbs (17.9 kg)
With years of experience supplying Businesses, Government Organisations, Charities, Schools, Colleges and Universities, we invite you to take advantage of our knowledge to help you make an informed choice, ensuring you are purchasing the best music products for your needs. With specialists in PA Systems, Pro Audio & Live Sound equipment on hand to answer calls and emails, you're in the best possible hands.
Contact us now to discuss your requirements or to request a quotation. Additional discounts may apply for educational establishments or size and value of order.
© Copyright 2016 A.C. Entertainment Technologies Ltd. All Rights Reserved - E&OE